- MaSoCist SoC builder
- Cottonpicken Engine
- JPEG Encoder IP
- cCAP: customizeable application processors and System on Chip solutions for networking and video processing
The MaSoCist build system
Pun intended: Applying a linux kernel configuration approach onto a hardware system turned out to be painful. However, it pays off:
- Cross platform: Simulate and synthesize reusable code for various architectures (Lattice, Xilinx, Altera FPGAs)
- Configure peripheral interface instances like a linux kernel
- Automated generation of address decoders, peripheral instances and memory map from gensoc – our in house SoC generator.
- Generate hardware configuration, software drivers and corresponding register documentation in one call: ‚make all‘
- Continuous integration for hardware designs: Run test benches automatically in the cloud for hardware verification
It allows vendor specific designs and extensions without the need to OpenSource, therefore it is available in two license variants:
- Limited OpenSource, now hosted at github: https://github.com/hackfin/MaSoCist
- Full SDK/HDK under Custom Vendor license
A fully usable Docker container is hosted at: https://hub.docker.com/r/hackfin/masocist/, use
docker pull hackfin/masocist
to download this container. If you want to run this on a Windows client, see Windows setup notes.
MaSoCist opensource primer:
IP blocks and cores
The Cottonpicken Engine is an in-house micro coded engine that has the following functionality:
- Bayer pattern decoding into various formats (YUV 4:2:2, YUV 4:2:0, RGB, programmable delays)
- 3×3, 5×5 filter kernels
- Specific matrix operations, cascadeable
It is capable of running at full data clock (pixel clock) up to 150 MHz, typically (platform dependent).
The engine is only available as a closed source netlist object as part of a development package.
JPEG Encoder IP
Our in-house designed, machine vision proof JPEG encoder and streaming solutions available for usage in standard FPGAs at low costs (at typically below 35’000 EUR support costs per project). The supported pixel bit depth is up to 12 bits. The JPEG IP is available in two standalone variants:
- L1 monochrome multiplexed pipeline (150 MHz pixel clock on Spartan6)
- L2 dual pipe simultaneous encoding for high quality YUV422, for example 1280×720@60fps (up to 100 MHz pixel clock)
- L2H: Higher pixel clock variant (up to 200MHz) available for specific platforms
Fully deployable UDP/Ethernet (RFC 2435) streaming solutions and camera reference designs are available as well. The receiver’s software side is covered with embedded gstreamer OpenSource appplications that run on Linux and Windows platforms, likewise.
[ more … ]
cCAP SoC Reference designs
These System on Chip designs consist of a fully configureable CPU plus standard peripherals and can be customized with special interfaces. The CPU can be programmed with GCC and is accessed via ICE JTAG during development. The underlying build and configuration system and some of the peripherals are available as Open Source, see MaSoCist.
[ more … ]
Full simulation models are available for all our IP cores that can be co-simulated with custom IP or run ‚live‘:
See also VirtualChip page.